🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

Denafrips Enyo 15th R-2R DAC

Product image 1
1 / 2

Denafrips Enyo 15th R-2R DAC

In celebration of DENAFRIPS's 15 years of exceptional digital audio expertise, the Enyo 15th Anniversary Edition incorporates highly sought-after features such as I²S input, a redesigned anodised aluminium chassis, and various performance enhancements.

If you're a music enthusiast who values high-quality, expressive, and analog-like sound, the Enyo 15th DAC could be a crucial component in your stereo audio setup.

To achieve a decent sounding R-2R DAC, the use of ultra-precise resistors is necessary. The cost of high precision resistors is expensive, each resistor must be stringently measured and matched by machine with human intervention to cross-check. These results in a very high cost in the manufacturing process, hence, R-2R DAC is also a symbol of high-end DAC.

 

The Enyo 15th employs true balance R-2R DAC design. Each channel is decoded by 4 sets of R-2R network. This design has a very small linear error, high decoding speed, low digital noise, not only to ensure that the audio signal is low distortion, but also to ensure a very low background music noise; allow the listener to enjoy the true music with a dark background.

Specifications 

  • I²S Input
  • True NOS R-2R DAC
  • Enhanced Power Supply, UPOCC Copper
  • Anodised Aluminium Chassis Silver/Black
  • Upgraded 12th Anniv. Firmware v1.8

Technical Highlights

  • Proprietary R2R + DSD Architecture
  • True balanced 24BIT R2R + 6BIT DSD (32 steps FIR Filters)
  • Low Thermal Effect, High Precision Hand-Matched 0.01% Resistors        
  • Low Noise Power Supply
  • FIFO Buffer
  • Digital Signal Processing via FPGA
  • DSD1024, PCM1536 Supports On USB Input
  • Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU
  • Licensed Thesycon USB Driver For Windows Platform
  • Driverless On Mac & Linux           

DSD  

  • DSD64-DoP On All Input
  • DSD1024* On USB Input Only

PCM  

  • 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input
  • 1536kHz* On USB Input 

Sampling Mode: Oversampling OS / Non-Oversampling NOS

Digital Input  

  • Coax x 1
  • TOSLink x 1
  • I2S x 1
  • USB2.0 Type B

Analogue Output          

  • RCA at 2.0Vrms, 625 Ω
  • XLR at 4.0Vrms, 1250 Ω                      

Frequency Response: 20-70KHz -3dB

THD+N: 0.004%

S/N Ratio: 115dB

Dynamic Range: >119dB

Stereo Crosstalk: -124dB

AC Power Requirement: 100-240VAC, 50/60Hz (Worldwide Voltage, Manual Selector)

Fuse: T2A/250VAC. 5x20mm 2A Slow Blow

Power Consumption: ≤20W

Dimension: 215W x 230D x 45H mm (Feet +18mm)

Package Dim: 375 x 330 x 115 mm

Package Content: DAC & Power Cord. No remote control.

Weight: 3.5 Kg           

Color: Black / Silver

Select Finish
From $372.69

Original: $1,064.82

-65%
Denafrips Enyo 15th R-2R DAC

$1,064.82

$372.69

Product Information

Shipping & Returns

Description

In celebration of DENAFRIPS's 15 years of exceptional digital audio expertise, the Enyo 15th Anniversary Edition incorporates highly sought-after features such as I²S input, a redesigned anodised aluminium chassis, and various performance enhancements.

If you're a music enthusiast who values high-quality, expressive, and analog-like sound, the Enyo 15th DAC could be a crucial component in your stereo audio setup.

To achieve a decent sounding R-2R DAC, the use of ultra-precise resistors is necessary. The cost of high precision resistors is expensive, each resistor must be stringently measured and matched by machine with human intervention to cross-check. These results in a very high cost in the manufacturing process, hence, R-2R DAC is also a symbol of high-end DAC.

 

The Enyo 15th employs true balance R-2R DAC design. Each channel is decoded by 4 sets of R-2R network. This design has a very small linear error, high decoding speed, low digital noise, not only to ensure that the audio signal is low distortion, but also to ensure a very low background music noise; allow the listener to enjoy the true music with a dark background.

Specifications 

  • I²S Input
  • True NOS R-2R DAC
  • Enhanced Power Supply, UPOCC Copper
  • Anodised Aluminium Chassis Silver/Black
  • Upgraded 12th Anniv. Firmware v1.8

Technical Highlights

  • Proprietary R2R + DSD Architecture
  • True balanced 24BIT R2R + 6BIT DSD (32 steps FIR Filters)
  • Low Thermal Effect, High Precision Hand-Matched 0.01% Resistors        
  • Low Noise Power Supply
  • FIFO Buffer
  • Digital Signal Processing via FPGA
  • DSD1024, PCM1536 Supports On USB Input
  • Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU
  • Licensed Thesycon USB Driver For Windows Platform
  • Driverless On Mac & Linux           

DSD  

  • DSD64-DoP On All Input
  • DSD1024* On USB Input Only

PCM  

  • 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input
  • 1536kHz* On USB Input 

Sampling Mode: Oversampling OS / Non-Oversampling NOS

Digital Input  

  • Coax x 1
  • TOSLink x 1
  • I2S x 1
  • USB2.0 Type B

Analogue Output          

  • RCA at 2.0Vrms, 625 Ω
  • XLR at 4.0Vrms, 1250 Ω                      

Frequency Response: 20-70KHz -3dB

THD+N: 0.004%

S/N Ratio: 115dB

Dynamic Range: >119dB

Stereo Crosstalk: -124dB

AC Power Requirement: 100-240VAC, 50/60Hz (Worldwide Voltage, Manual Selector)

Fuse: T2A/250VAC. 5x20mm 2A Slow Blow

Power Consumption: ≤20W

Dimension: 215W x 230D x 45H mm (Feet +18mm)

Package Dim: 375 x 330 x 115 mm

Package Content: DAC & Power Cord. No remote control.

Weight: 3.5 Kg           

Color: Black / Silver